These Monitor Reference speakers have been tested and work beautifully.
Few scratches, mostly on the bottom from Normal use, but overall,
excellent condition (please see photos below),
COMES With 40 Page reference Manual.
sold
Pasadena
Pawn Shop
2696 E Colorado Blvd
Pasadena CA 91107
626-440-0030
Product Description
Incredible Accuracy in a Truly Affordable Powered Monitoring System
By combining our expertise in reference monitor design with our proven
track record in studio amplification, Alesis' new M1 Activeś Biamplified
Reference Monitor offers the incredibly accurate response that perfectly
translates to every playback system. Its internal active crossover and
custom-designed dual amplifiers ensure an extremely consistent
performance under a variety of different studio conditions and program
material. The result is a broad, extremely flat frequency response,
clear imaging with a wide sweet spot, high power handling and detailed
high- and mid-frequency response that only a professional powered
monitor can deliver.
Custom Drivers Designed For Active Monitoring
The M1 Active's woofer and tweeter were specifically designed for the
most linear, low distortion response in powered monitoring applications.
Its 6.5" woofer cone is formulated from non-woven carbon fiber. It's a
material that has been used for the skins of combat aircraft wings,
since it offers high tensile strength and low weight. In fact, carbon
fiber is 25% lighter than polypropylene (the most common driver
material) and hence provides quicker transient response in the low
frequency range for superb bass response as well as a vast improvement
in the detail of critical upper-mid frequencies. The M1 Active's 1"
tweeter dome is made of pure silk, which offers a natural response that
aids in preventing ear fatigue during long mix sessions. It also
features an internal pole piece mounted phasing plug and is ferrofluid
cooled to maintain the best balance of transient response to power
handling.
Active Bi-Amplifiers and Electronic Crossovers
Two audiophile-quality amplifiers-a 75 watt woofer amp and a 25 watt
tweeter amp-were developed for the M1 Active, along with 8th order high-
and low-pass electronic crossover filters. The crossover point was
carefully chosen at a low 1500Hz, and produces an extremely wide
dispersion zone as well as low midrange coloration. Also, the special
time alignment circuitry that's been added to the tweeter section of
this crossover allows the output of frequencies from the high and low
drivers to occur in perfect synchronization, avoiding the time smear
that's typical in less advanced powered speakers.
Attractive Cabinet Design with Dual Ports and Offset Tweeter
In developing the M1 Active, the Alesis engineering team discovered that
dual font-mounted ports provided the fastest, most coherent and extended
low frequency augmentation. Also, the unique offset design of the high
frequency driver allows for the flattest frequency and power response in
a speaker that offers such wide dispersion. The M1 Active's attractive
mirror-imaged, charcoal- toned cabinet and magnetically-shielded drivers
allow for placement in close proximity with computer or video monitors,
and offers the added benefit of blending beautifully into your studio's
decor without being obtrusive. They may be mounted in either a
horizontal or vertical placement to best fit your studio's requirements.
The Alesis M1 Activeś
With the lineage of our TEC Award-winning Monitor Onet Studio Reference
Monitor, Alesis speakers have already become a standard in project and
professional studios around the world. If you're looking for the same
great accuracy and detailed response in a powered system that's truly
affordable, the answer is clear: the new M1 Active from Alesis.
Technical Description
Low Frequency Driver: 6.5" non-woven carbon fiber with Santoprene
surround and dual magnet shielded configuration
High Frequency Driver: 1" silk dome with medium viscosity ferrofluid
coolant and dual magnet shielded configuration
Crossover: 1500Hz, 8th-order, 48dB/octave filters
Input Impedance: 20k_ balanced, 10k_ unbalanced
LF Filter: 2nd order, "optimal Q" high pass, +1dB boost@50Hz
LF Amplifier: 75 watts, 8_ load
LF Amp Distortion:
* lf amp slew rate:<>19V/µsec
LF Amp S/N Ratio: >110dB, ref. 60W @ 8_, A-wtg., 1kHz
HF Amplifier: 25 watts, 4_ load
HF Amp Distortion:
* lf amp slew rate:<>9V/µsec
HF Amp S/N Ratio: >112dB @ rated output
Frequency Range: 38 Hz - 23.5 kHz (-10dB point)
Connectors: Combination XLR-1/4" jack with input level control
Dimensions: (WxHxD) 8.5"x15"x9.75" (381mm x 216mm x 248mm)
|
|
Payment Methods:
(No
COD's)
Absolutely No Credit Card Transactions From
Indonesia & Malaysia
USA & CANADA ONLY:
Pay over the phone:
Visa/MasterCard
American Express
Discover - Paypal -
Western union - Money Gram
Bank Transfers :) Cash
Send by mail:
Money Order
Cashiers Checks
Bank Transfers
Western Union
Bid Pay
PayPal - Confirmed address only
Please Email me regarding your payment before placing your
bid
Items will only be send to your credit card / paypal
mailing address
OTHER COUNTRIES:
Send by mail:
Money Order
Cashiers Checks
Bank Transfers
Western Union
Bid Pay
PayPal - Confirmed address only
Please send me a email regarding
your payment before placing your bid
Items will only be send to your paypal mailing address
SHIPPING INFORMATION:
(UPS - USPS - FedEx - or Buyer's UPS Account #)
Will Call for local buyers
Shipping and handling fee provided by me at the Ebay auction
is only for US 48 stats
Email me your complete address for SH cost
of Hawaii, Alaska & Porto Rico
Auctions do
not end early - Please don't Ask
At the conclusion of the auction please contact us within
24 hours by email or phone with your choice of payment
method, shipping preference and mailing address.
Unfortunately, all California residents must pay 8.25%
sales tax. :-(
Thank you, for your interest in our EBay auctions.
|
